- 天博BOB编辑:xghl发布日期：2018-06-20 09:55 浏览次数：
The operation of the automatic tapping machine is very simple, and the operation mode of all kinds of tapping machines is different. Today, the operation of the gear tapping machine and how to improve the stability of the automatic tapping machine will be shared with everyone, from the various links of the automatic tapping machine.
The first feeding part (vibrating plate) should ensure the unity of the product shape, the tolerance of the length and the length of the product can not be too far away, the best cleaning of the product surface, not too much oil pollution, too much oil pollution greatly affects the stability of the feeding of the vibrating disc. In addition, the product can not contain sundries and iron chips. It is best to screen them before placing them in the vibrating tray.
Second point clamping part, before making jig, it is best to measure the external tolerance of several products, and try to ensure the combination effect of the fixture and the product as far as possible. The fixture is better to use the processed materials to ensure the durability of the fixture, and the stability of the machine will be greatly improved.
Third points to attack the tooth part, ensure the center of the main axis of the tapping machine and the inner hole center of the product, the center must be adjusted, otherwise the quality of the thread of the taps and the thread quality of the products are seriously affected, and the extrusion taps are used as much as possible, and the stability of the non chip processing to the attack tooth machine will undoubtedly have a great improvement. It is necessary to add special oil for tapping, which has obvious effect on the durability of tap.